LED flat light manufacturers to extend life, cannot leave is maintenance and maintenance

Brief introduction of t5t8 fluorescent lamp manufacturer's use rules and maintenance methods: after buying back the lamp, do not be busy with the installation, read the installation instructions carefully, and then follow the installation instructions. During cleaning and maintenance, do not change the structure of the lamp, and do not change the parts of the lamp at will. After maintenance, install the lamp as it is, and do not omit or misplace the parts of the lamp.

1. The installation of the product must be a professional electrician with a certificate. Do not install by yourself to avoid unnecessary danger.

2. Take out the t5t8 fluorescent lamp from the packing box to check whether it is complete.

3. The distance between the product and the inflammable material shall be at least 0.2m, and the ceiling to be installed shall have a gap of 2cm high. The t5t8 fluorescent lamp cannot be completely installed in the ceiling, or the wall with heat source. Pay attention to separate the low-voltage and high-voltage electrical wiring.

4. The wiring on the luminaire can be fixed with wire clamps through the wiring at the back of the luminaire through drilling holes, to ensure the fixation is firm.

5. Make sure that the power cord of the lamp has enough length and is not subject to tension or tangential force. When installing the wiring of lamps, avoid excessive tension and knot the wiring. The output wiring shall be distinguished from other lamps.

After installation, connect the low-voltage plug of the lamp with the low-voltage plug of the switching power supply.

Nbsp; & nbsp; 7. Connect the tail of the switch power supply of the luminaire with the mains power supply. Generally, the brown (black) line is the live line and the blue line is the zero line.

8. Non professionals are not allowed to dismantle or repair.

The fluorescent lamp should not be turned on and off frequently when it is used directly. Although the resistant switching times of the LED lamp is about 18 times of that of the ordinary fluorescent lamp, the excessive frequency will still affect the life of the electronic components inside the LED lamp, thus affecting the life of the lamp. T5t8 fluorescent lamp should not be cleaned with water as far as possible, as long as it can be wiped with a dry cloth. If it is not careful to touch water, it should be wiped as far as possible. It is forbidden to wipe with a wet cloth immediately after turning on the lamp.